Затвори
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

NP545
KESTER NP545 is a lead-free No Clean solder paste with a wide range of applications. Available in particle sizes 15-25 µm (Class 5), 20-38 µm (Class 4) and 25-45 µm (Class 3). Delivered in 500gr. jars or 600gr. cartridges.
Solder paste
Kester

959T
Kester 959T is a no-clean, non-corrosive, liquid flux with low solids content that is designed for wave soldering of trough hole and surface mount circuit board assemblies. Delivered in 25l cans.
Flux
Kester

1R32A-2
HumiSeal 1R32A-2 is a fast-drying, single component acrylic coating, formulated for improved adhesion to typical substrates while providing excellent moisture and fluoresces under UV light to aid inspection for printed circuit boards. Delivered in 1L, 5L or 20L can.
Coatings and Thinners
Humiseal

2220-VF
KESTER 2220-VF is a water based liquid flux without volatile organic components (VOC free) designed for lead-free automated wave solder applications. Delivered in 25l cans.
Flux
Kester

2235
KESTER 2235 is a water soluble liquid flux on an alcohol basis without volatile organic components (VOC free). Delivered in 25l cans.
Flux
Kester

SELECT-10
KESTER SELECT-10 is a No Clean alcohol-based liquid flux designed for use in selective soldering. Delivered in 5l cans.
Flux
Kester

TSF6592
Kester TSF-6592 is a no-clean paste flux designed as a solution for a range of lead-free applications such as rework/repair of CSP's, BGA's, SMD's, flip chip attach, sphere or ball attach or any lead-free soldering application that requires a very tacky flux. Delivered in 10 gr. syringes.
Flux
Kester

985M
KESTER 985M is a No Clean alcohol-based liquid flux with a high activity and wide range of application. Delivered in 25l cans.
Flux
Kester

IPA/DI Water Tub Wipes
Wipes soaked in IPA or deionized water, for cleaning stencils and PCB's. 130 pcs. per Tub, size: 200 x 200 mm.
Cleaning paper
EDSON Electronics

Stencil Cleaning Roll EKRA
Cleaning paper for EKRA printers.
Cleaning paper
EDSON Electronics

Stencil Cleaning Roll SAMSUNG
Cleaning paper for Samsung printers.
Cleaning paper
EDSON Electronics

Stencil Cleaning Roll DEK/EUROPLACER
Cleaning paper for DEK/EUROPLACER printers.
Cleaning paper
EDSON Electronics

952S
KESTER 952S is a No Clean alcohol-based liquid flux is primarily designed for use in tabber and stringer equipment of Photovoltaic Assembly (PV) module industry. Delivered in 25l cans.
Flux
Kester

Telecore HF-850
Alpha Telecore HF-850 is a No Clean solder wire with flux content of 1.1%, 2.2% or 3.3%. Available in lead and lead-free alloys on spools of 500 gr. in the following diameters - 0.4mm; 0.6mm; 0.8mm and 1.0mm.
Solder wire
MacDermid Alpha

245
Kester 245 is a No Clean leaded solder wire with metal content Sn63Pb37, flux content of 1.1% or 2.2%, on spools of 500 gr. and is available in the following diameters - 0.4mm; 0.6mm; 0.8mm; 1.0mm and 1.2mm.
Solder wire
Kester

275 К100LD
Kester 275 is a No Clean lead-free solder wire with metal content Sn99.3 Cu0.7, flux content of 3.3%, on spools of 500 gr. and is available in the following diameters - 0.4mm; 0.6mm; 0.8mm; 1.0mm and 1.5mm.
Solder wire
Kester

275 SAC305
Kester 275 is a No Clean lead-free solder wire with metal content Sn96.5 Ag3 Cu0.5, flux content of 2.2%, on spools of 500 gr. and is available in the following diameters - 0.4mm; 0.6mm; 0.8mm; 1.0mm and 1.5mm.
Solder wire
Kester

EP256
KESTER EP256 is a leaded No Clean solder paste. Available in particle sizes 20-38 µm (Class 4) and 25-45 µm (Class 3). Delivered in 500gr. jars and 600gr. cartridges.
Solder paste
Kester

OM-362
Alpha OM-362 is a lead-free No Clean solder paste designed to provide ultra-low voiding performance. Available in particle size 20-38 µm (Class 4). Delivered in 500gr. jars
Solder paste
MacDermid Alpha

CVP-390V
Alpha CVP-390V is a lead-free No Clean solder paste that exhibits best-in-class electrochemical reliability down to 0.100mm comb spacing against the most challenging SIR profiles. Available in particle sizes 15-25 µm (Class 5) and 20-38 µm (Class 4). Delivered in 500gr. jars.
Solder paste
MacDermid Alpha

Sn63Pb37
Leaded solder. Delivered in 1 kg. bars with metal content - Sn63Pb37.
Solder bar
Kester

K100 LD
Lead-free solder. Delivered in 1 kg. bars with metal content - Sn99.3 Cu0.7.
Solder bar
Kester

SAC305
Lead-free solder. Delivered in 1 kg. bars with metal content - Sn96.5 Ag3 Cu0.5.
Solder bar
Kester

Sticklers - Fiber Optic Cleaning Sticks
The Sticklers™ CleanStixx™ connector cleaning sticks are reliable, inexpensive tools engineered for critical cleaning of end face connectors located in mating sleeves or the contact areas of receptacles used in high-speed fiber optic networks.
Cleaning chemicals
Microcare

PowerClean
PowerClean Lead-Free Flux Remover removes hard-to-clean lead-free solders and fluxes. Eliminates white residue commonly found with high temperature lead-free fluxes.
Cleaning chemicals
Microcare

VeriClean
VeriClean No Clean Flux Remover removes residue from no clean soldering fluxes and pastes. Ideal for cleaning thru-hole and SMT designs, getting under BGA chips, and rinsing residue from connectors.
Cleaning chemicals
Microcare

PROMOCLEAN OVEN 4
PROMOCLEAN OVEN 4 is especially designed for manual cleaning of all types of baked-on flux residues left on reflow ovens. Delivered in 750ml. spray bottle or 20L tube.
Cleaning chemicals
INVENTEC

TOPKLEAN EL-10F
TOPKLEAN EL 10F is a multi-purpose electronic cleaner for removal of flux residues, non-reflowed solder pastes and uncured glue. Delivered in 500 ml. spray bottle or 20L tube
Cleaning chemicals
INVENTEC

TOPKLEAN EL 606
TOPKLEAN EL 606 is especially designed to clean stencils and misprinted PCB’s from unsoldered paste in automatic cleaning machines. Delivered in 20L tube.
Cleaning chemicals
INVENTEC

TOPKLEAN EL 7
TOPKLEAN EL 7 is especially designed to remove all types of solder paste from stencils when used in automatic stencil printers. Delivered in 20L tube.
Cleaning chemicals
INVENTEC

T73
Humiseal T73 Thinner is compatible with the following Humiseal coatings: 1B73. It contains flammable ingredients and is in full compliance with RoHS directive 2015/863/EU. Delivered in 1L, 5L or 20L can.
Coatings and Thinners
Humiseal

T503
Humiseal T503 Thinner is compatible with the following Humiseal Coatings: 1B73, 1B12, 1B31, 1B66. It contains flammable ingredients and is in full compliance with RoHS directive 2015/863/EU. Delivered in 1L, 5L or 20L can
Coatings and Thinners
Humiseal

1B73/1B73 EPA
HumiSeal 1B73 Acrylic Conformal Coating is a one component, fast curing acrylic coating that is used for circuit boards and can be easily repaired. It offers excellent flexibility, electrical properties, and fluoresces under UV light to aid inspection. It can be applied by spraying, brushing, or dipping methods. Delivered in 330 ml spray can, 1L, 5L or 20L can.
Coatings and Thinners
Humiseal

Lint Free Wipes - BW 150
Dry wipes made of lint-free material that does not leave lint after cleaning stencils and printed circuit boards. 150 pcs. in a box, size: 228 x 210 mm.
Cleaning paper
EDSON Electronics

Electroguard A40
Electroguard A40 is a Single Pack Water Based, Static Dissipative Acrylic paint suitable for floors and walls. It is a high specification method of grounding personnel and preventing static build up at an inexpensive price.
Antistatic paint
EDSON Electronics

2040 S/40R
The PERMACOL 2040-series are thermosetting single component adhesives especially developed for the SMT purposes. The 2040S/40R is intended for stencil printing. Delivered in 10 ml. syringes and 310 ml. cartridges.
Glue
Permacol

Electroguard E30
Electroguard E30 is a Two-Pack Water Based, Static Dissipative Polyurethane paint. It offers an inexpensive yet high specification means of protecting sensitive areas from the costly effects of static build up and provides a means of grounding personnel.
Antistatic paint
EDSON Electronics

2040 S/20R
The PERMACOL 2040-series are thermosetting single component adhesives especially developed for SMT purposes. The 2040S/20Ris intended for stencil printing and high viscosity dispensing. Delivered in 10 ml. syringes and 310 ml. cartridges.
Glue
Permacol

T521 EU
Humiseal T521 EU Thinner is compatible with the following Humiseal coatings: 1A20, 1A27, 1A33, 1B31, 1B66, 1B73, 1B51 and 1R32. It contains flammable ingredients and is in full compliance with RoHS directive 2015/863/EU. Delivered in 1L, 5L or 20L can.
Coatings and Thinners
Humiseal

2040 D/R
The PERMACOL 2040-series are thermosetting single component adhesives especially developed for the SMT purposes. The 2040D/R is intended for high speed dispensing. Delivered in 10 ml. syringes and 310 ml. cartridges.
Glue
Permacol
We couldn't find any results
Please try using different filters