KESTER NP545 is a lead-free No Clean solder paste with a wide range of applications. Available in particle sizes 15-25 µm (Class 5), 20-38 µm (Class 4) and 25-45 µm (Class 3). Delivered in 500gr. jars or 600gr. cartridges.

Kester 959T is a no-clean, non-corrosive, liquid flux with low solids content that is designed for wave soldering of trough hole and surface mount circuit board assemblies. Delivered in 25l cans.

HumiSeal 1R32A-2 is a fast-drying, single component acrylic coating, formulated for improved adhesion to typical substrates while providing excellent moisture and fluoresces under UV light to aid inspection for printed circuit boards. Delivered in 1L, 5L or 20L can.

Automatic inline high performance stencil/screen printer for high and medium volume production with Cycle time of 11.5 sec. (Standard), max. PCB size 610 x 515 mm.

Automatic inline P+P machine for high volume production with up to 128 feeders and max. speed of 115 000 cph (IPC 9850).

Heller 1707 MK7 is one of the most popular models from the MK7 family featuring lowest consumption of electrical energy, shortest time for profile changeover and overall lower oven height with 16 cm. The 1707 MK7 is an inline reflow oven for medium volume production with 7 Top and 7 Bottom heating zones as well as 1 Top Cooling zone.

Machine with a revolutionary twin PCB rotary table transport system which allows simultaneous load/unload during operation. Designed for medium production volumes and offers great flexibility. The PCB carrier has a max. work area of 457mm x 508mm.

A smart device built with the Latest Data Processing and Wireless Technologies available. SPS can help you to reduce your production cost, improve quality and share data conveniently. The hardware is the best in temperature tolerance design using an LCP (Liquid Crystal Polymer) enclosure for better protection and faster cool down between profiles. You can connect 7, 9 or 12 Thermocouples.

RMSE Station, equipped with MSE Module, ensures efficient and precise solder removal with its powerful suction system. It provides the fastest and safest solution for soldering and rework, including hot air applications.

KESTER 2220-VF is a water based liquid flux without volatile organic components (VOC free) designed for lead-free automated wave solder applications. Delivered in 25l cans.

KESTER 2235 is a water soluble liquid flux on an alcohol basis without volatile organic components (VOC free). Delivered in 25l cans.

KESTER SELECT-10 is a No Clean alcohol-based liquid flux designed for use in selective soldering. Delivered in 5l cans.

Kester TSF-6592 is a no-clean paste flux designed as a solution for a range of lead-free applications such as rework/repair of CSP's, BGA's, SMD's, flip chip attach, sphere or ball attach or any lead-free soldering application that requires a very tacky flux. Delivered in 10 gr. syringes.

KESTER 985M is a No Clean alcohol-based liquid flux with a high activity and wide range of application. Delivered in 25l cans.

Automatic offline stencil printer for small and medium volume production with print area 400 x 400 mm. (500 x 400 mm. optional).

Automatic inline stencil printer for medium to high volume production with max. PCB size 400 x 340 mm.

Manual stencil printer for small volume production with print area - 500 x 400 mm.

Semi-automatic stencil printer for small to medium volume production with print area 480 x 420 mm.

Automatic offline stencil printer for medium volume production with automatic fiducial recognition and print area 320 x 440 mm.

Automatic inline high performance low maintenance stencil/screen printer for medium to high volume production. Cycle time - 9s. (Standard); 7s. Optional (Velocity); 5s. Optional (Velocity+). Works with max. PCB size 610 x 515 mm.

The ASSCON desoldering system for use in vapor phase soldering systems. Multi-pole SMD components, ball grid arrays, connector strips as well as mechanical elements can be desoldered gently and safely.

Its composition, Preheater and PCB Support, is a complete solution to rework medium / large PCBAs, such as the ones commonly used in laptops or PCB panels. It features a heating area of 360 x 277 mm / 14.2 x 10.9 in. and four TC connections.

Indispensable for avoiding thermal shock on multilayer PCBs while reworking. Its composition, Preheater and PCB support, is a complete solution to rework small / medium PCBAs, such as the ones commonly used in electronic industries. It features a heating area of 130 x 135 mm / 5.12 x 5.31 in and four TC connections.

Set consisting of several solder paste dispensing needles with different gauge, from gauge 18 to gauge 30, recommended for solder paste Type 2, 3, 4, 5 and 6. Supplied in boxes of 16 units.

Enhance precision soldering with JBC C245 cartridges, offering versatile SMD handling and extended lifespan for demanding tasks.

Maximize desoldering performance with JBC Long Life tips, delivering instant heat-up and superior durability for DR560 tools.

C250 Cartridge Range can be aligned using the anti-rotation screw incorporated on the tool. These cartridges feature straight and bent tips to best suit your working needs.

Perfect your general soldering needs with JBC R245 cartridges, offering 4-way positioning and precise alignment for consistent results.

Tackle demanding soldering jobs with JBC C470 cartridges, offering high-power performance and extended lifespan for heavy-duty work.

C120 Cartridge Range is suitable for soldering and desoldering chip components or dual in line easily, reducing handling time. They work with Micro Tweezers which enables to align the cartridges according to the user needs.

R470 Cartridge Range is designed for Heavy Duty Soldering Applications and have an special thickness of protection. Its design includes a square cross-section that centers the cartridge perfectly into the Soldering Irons and guarantees precise vertical positioning.

C420 Cartridge Range is suitable for soldering and desoldering SMD components, reducing handling time. These cartridges are compatible with HT420 and AT420 Thermal Tweezers.

C210 Cartridge Range is suitable for precision soldering jobs with medium power requirements. Due to the size, these cartridges are perfect to work with SMD, under a microscope, or with conventional components.

Master nano-scale soldering with JBC C115 cartridges, delivering microscopic precision and 5x longer life for delicate work.

This is a complete system of Preheater and PCB support for preheating big-sized PCBA's and ideal for repetitive soldering jobs. It features a heating area of 510 x 610 mm / 20.07 x 24 in. with 6 independent work zones (255 x 203 mm / 10.04 x 8 in) to be switched on/off.

HM245 is a complete solution for selective general electronics applications. The Cartridge is exchanged manually.

HA470 Heavy Duty Soldering Set is the most powerful selective soldering solution and the first one featuring Automatic Cartridge Exchange.

FAE is the most effective solution to avoid exposure to solder fumes. Fume extraction starts up when the tool is lifted from the stand, operating only when soldering. This function saves power and extends filter life.

Perform a thorough and gentle tip cleaning increasing heat transfer and maximizing the soldering quality in less than 1 second. CL2008 Fiber Brushes supplied provides a soft cleaning, specially recommended in regular usage to improve tip life.

FAE is the most effective solution to avoid exposure to solder fumes. Fume extraction starts up when the tool is lifted from the stand, operating only when soldering. This function saves power and extends filter life.

WSB is specially designed for stripping wire insulations made of thermostable materials such as Teflon*, Kapton*, Silicone, Rubber, PVC, Kynar, Nylon and Polyethylen from 34 to 16 AWG (0.16 to 1.29 mm) with temperatures up to 800 ºC / 1470 ºF.

The complete solution to rework circuits with medium power requirement. Equipped with T245 General Purpose Handle and DR560 Desoldering Iron. Its DDE 2-Tool Control Unit is capable of manage up to 2 tools simultaneously and fully compatible with 10 different JBC tools.

JNA is the only Hot Air Station to rework SMDs without affecting nearby components. It is the perfect station for easy and high-precision reworking of components as small as 01005, even under the magnifying glass.

TESE is a precision hot air station capable of reworking small and medium SMDs. Connecting an external thermocouple provides a high-precise close-loop control of the component/PCB during the rework process or can also be used to protect a component or a specific area of the PCB.

Ideal for soldering processes requiring high productivity. It includes JBC Most Efficient Soldering System. This station is supplied with GALE10V to feed solder wire of Ø 1 mm and is furthermore compatible with solder wires from Ø 0.4 mm up to Ø 1.8 mm, using the respective Solder Wire Guide Kit.

Ideal for soldering and reworking the smallest SMD. It provides all the advantages of JBC Most Efficient Soldering System.

DME Control Unit manages up to 4 tools simultaneously and is fully compatible with 10 different JBC tools. MSE Electric Desoldering Module is indispensable for a Repairing process. It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation Modes help to extend life of tips.

DME Control Unit manages up to 4 tools simultaneously and is fully compatible with 10 different JBC tools. MSE Electric Desoldering Module is indispensable for a Repairing process. It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation Modes help to extend life of tips.

This station is the most powerful soldering unit in the JBC range and it is designed for soldering applications that require large amounts of heat. It provides all the advantages of the JBC Most Efficient Soldering System.

The CDN is designed for highest-precision jobs in any micro-soldering application, offering maximum control working under the microscope. It provides all the advantages of JBC Most Efficient Soldering System in the smallest footprint.

Designed for highest precision applications offering maximum control working under microscope. It provides all the advantages of the JBC Most Efficient Soldering System.

Ideal for soldering and reworking SMT chip components, small / medium SOP and dual line components. It provides all the advantages of the JBC Most Efficient Soldering System in the smallest footprint.

Why Soldering Assistant? It will help to improve the soldering skills, to select the optimal temperature and cartridge and to have a more efficient and quality production. This station is deal for general soldering applications.

JTSE is a high powered Hot Air Station capable of reworking all types of SMD's. The combination of the exclusive JBC hot air system with protectors, tripods and extractors ensures desoldering components easily and safely, concentrating the heat on the selected component.

Ideal for soldering SMD. It provides all the advantages of the JBC Most Efficient Soldering System in the smallest footprint.

For general electronics application. It provides all the advantages of the JBC Most Efficient Soldering System in the smallest footprint.

Wipes soaked in IPA or deionized water, for cleaning stencils and PCB's. 130 pcs. per Tub, size: 200 x 200 mm.

Cleaning paper for EKRA printers.

Cleaning paper for Samsung printers.

Cleaning paper for DEK/EUROPLACER printers.

KESTER 952S is a No Clean alcohol-based liquid flux is primarily designed for use in tabber and stringer equipment of Photovoltaic Assembly (PV) module industry. Delivered in 25l cans.

Alpha Telecore HF-850 is a No Clean solder wire with flux content of 1.1%, 2.2% or 3.3%. Available in lead and lead-free alloys on spools of 500 gr. in the following diameters - 0.4mm; 0.6mm; 0.8mm and 1.0mm.

Kester 245 is a No Clean leaded solder wire with metal content Sn63Pb37, flux content of 1.1% or 2.2%, on spools of 500 gr. and is available in the following diameters - 0.4mm; 0.6mm; 0.8mm; 1.0mm and 1.2mm.

Kester 275 is a No Clean lead-free solder wire with metal content Sn99.3 Cu0.7, flux content of 3.3%, on spools of 500 gr. and is available in the following diameters - 0.4mm; 0.6mm; 0.8mm; 1.0mm and 1.5mm.

Kester 275 is a No Clean lead-free solder wire with metal content Sn96.5 Ag3 Cu0.5, flux content of 2.2%, on spools of 500 gr. and is available in the following diameters - 0.4mm; 0.6mm; 0.8mm; 1.0mm and 1.5mm.

KESTER EP256 is a leaded No Clean solder paste. Available in particle sizes 20-38 µm (Class 4) and 25-45 µm (Class 3). Delivered in 500gr. jars and 600gr. cartridges.

Alpha OM-362 is a lead-free No Clean solder paste designed to provide ultra-low voiding performance. Available in particle size 20-38 µm (Class 4). Delivered in 500gr. jars

Alpha CVP-390V is a lead-free No Clean solder paste that exhibits best-in-class electrochemical reliability down to 0.100mm comb spacing against the most challenging SIR profiles. Available in particle sizes 15-25 µm (Class 5) and 20-38 µm (Class 4). Delivered in 500gr. jars.

Leaded solder. Delivered in 1 kg. bars with metal content - Sn63Pb37.

Lead-free solder. Delivered in 1 kg. bars with metal content - Sn99.3 Cu0.7.

Lead-free solder. Delivered in 1 kg. bars with metal content - Sn96.5 Ag3 Cu0.5.

The Sticklers™ CleanStixx™ connector cleaning sticks are reliable, inexpensive tools engineered for critical cleaning of end face connectors located in mating sleeves or the contact areas of receptacles used in high-speed fiber optic networks.

PowerClean Lead-Free Flux Remover removes hard-to-clean lead-free solders and fluxes. Eliminates white residue commonly found with high temperature lead-free fluxes.

VeriClean No Clean Flux Remover removes residue from no clean soldering fluxes and pastes. Ideal for cleaning thru-hole and SMT designs, getting under BGA chips, and rinsing residue from connectors.

PROMOCLEAN OVEN 4 is especially designed for manual cleaning of all types of baked-on flux residues left on reflow ovens. Delivered in 750ml. spray bottle or 20L tube.

TOPKLEAN EL 10F is a multi-purpose electronic cleaner for removal of flux residues, non-reflowed solder pastes and uncured glue. Delivered in 500 ml. spray bottle or 20L tube

TOPKLEAN EL 606 is especially designed to clean stencils and misprinted PCB’s from unsoldered paste in automatic cleaning machines. Delivered in 20L tube.

TOPKLEAN EL 7 is especially designed to remove all types of solder paste from stencils when used in automatic stencil printers. Delivered in 20L tube.

Humiseal T73 Thinner is compatible with the following Humiseal coatings: 1B73. It contains flammable ingredients and is in full compliance with RoHS directive 2015/863/EU. Delivered in 1L, 5L or 20L can.

Humiseal T503 Thinner is compatible with the following Humiseal Coatings: 1B73, 1B12, 1B31, 1B66. It contains flammable ingredients and is in full compliance with RoHS directive 2015/863/EU. Delivered in 1L, 5L or 20L can

HumiSeal 1B73 Acrylic Conformal Coating is a one component, fast curing acrylic coating that is used for circuit boards and can be easily repaired. It offers excellent flexibility, electrical properties, and fluoresces under UV light to aid inspection. It can be applied by spraying, brushing, or dipping methods. Delivered in 330 ml spray can, 1L, 5L or 20L can.

The Dry storage cabinets in the SD+ series are the highest performance versions of the SD range and are fully network compatible. The Storage Cabinets are equipped with high precision sensors, dynamic regeneration and integrated data logging. Safe and energy efficient low humidity control of <2% RH. A second drying unit ensures uninterrupted and redundant drying (SD+ 1104, 1106 and 1704 only).

The HSD Series Drying Cabinets deliver outstanding drying for moisture sensitive components and PCBs as a result of a high-performance drying unit

SDB Series Drying Cabinets are engineered for medium- to long­-term storage. The storage cabinets are equipped with a patented U­-4001 drying unit. The drying unit delivers outstanding drying performance. The drying unit guarantees constant low relative humidity ≤5% RH for medium- to long-term storage of moisture sensitive components and PCBs. Oxidation risks associated with long-term storage can hereby be avoided.

MENISCO ST78 is a measuring device which allows any wettability phenomena to be quantified every time solids and liquids are involved.

Fully new versatile multimedia equipment, with two modules for all type of solderability tests.

Automatic inline wave soldering machine with a preheat length of 2100 mm. It works with max. PCB size 400 x 400mm. and solder bath capacity 450 kg.

Automatic inline wave soldering machine with a preheat length of 1600 mm. It works with max. PCB size 400 x 400mm. and solder bath capacity 475 kg.

Automatic inline wave soldering machine with a preheat length of 700 mm. It works with max. PCB size 400 x 400mm. and solder bath capacity 270 kg.

Automatic benchtop wave soldering machine with a preheat length of 500 mm. It works with max. PCB size 300 x 400mm. and solder bath capacity 150 kg.

Auto-Focus Power™ is a ‘recipe search engine’ with an intelligent database.

The KIC Carrier further assists the task of profiling, and is available in several models to accommodate a variety of reflow process types.

Program the KIC MVP™ fixture by running a single profile on your PCB. Subsequent profile runs only require the use of the MVP fixture without the production board. The single programming run eliminates the need to sacrifice your PCB.

KIC’s powerful Navigator Power™ software is a system that lowers your electricity use and improves production quality.

The ProBot compliments the reflow oven by automatically recording the profile for each and every processed PCB. On the fly, the profile is compared to the established process window to determine whether it is in spec or not. This occurs in the background without human intervention and without interrupting production. The ProBot is programmed by running a manual profile using a KIC profiler.

The KIC® Wave Surfer™ is a self-contained system that provides critical data on wave solder machine set up and performance.

The RPI utilizes embedded sensors for heat and conveyor speed to automatically measure and display PCB profile, Process traceability, SPC and Cpk charts, statistics of defects, process yields and other.

KICstart²™ utilizes the core technologies developed by KIC, the world’s premier thermal profiling company. Packaging these innovative technologies into a low-cost system, makes it an ideal cost effective entry level thermal profiler. The KICstart² profiler has everything you need to quickly acquire an accurate profile, without complicated features that can slow you down. You can connect 6 Thermocouples.

K² Profile Setter makes oven setup easy and quick (with optional KIC’s optimization software). You can connect 7 or 9 Thermocouples. User friendliness and convenience now include profile viewing on Android and Apple mobile devices.

Inline, modular selective soldering system designed for medium and high production volumes Synchrodex offers high speed and flexibility. It has a max. working area of 457mm x 610mm.