Automatic inline high performance stencil/screen printer for high and medium volume production with Cycle time of 11.5 sec. (Standard), max. PCB size 610 x 515 mm.

Automatic inline P+P machine for high volume production with up to 128 feeders and max. speed of 115 000 cph (IPC 9850).

Heller 1707 MK7 is one of the most popular models from the MK7 family featuring lowest consumption of electrical energy, shortest time for profile changeover and overall lower oven height with 16 cm. The 1707 MK7 is an inline reflow oven for medium volume production with 7 Top and 7 Bottom heating zones as well as 1 Top Cooling zone.

Machine with a revolutionary twin PCB rotary table transport system which allows simultaneous load/unload during operation. Designed for medium production volumes and offers great flexibility. The PCB carrier has a max. work area of 457mm x 508mm.

A smart device built with the Latest Data Processing and Wireless Technologies available. SPS can help you to reduce your production cost, improve quality and share data conveniently. The hardware is the best in temperature tolerance design using an LCP (Liquid Crystal Polymer) enclosure for better protection and faster cool down between profiles. You can connect 7, 9 or 12 Thermocouples.

RMSE Station, equipped with MSE Module, ensures efficient and precise solder removal with its powerful suction system. It provides the fastest and safest solution for soldering and rework, including hot air applications.

Automatic offline stencil printer for small and medium volume production with print area 400 x 400 mm. (500 x 400 mm. optional).

Automatic inline stencil printer for medium to high volume production with max. PCB size 400 x 340 mm.

Manual stencil printer for small volume production with print area - 500 x 400 mm.

Semi-automatic stencil printer for small to medium volume production with print area 480 x 420 mm.

Automatic offline stencil printer for medium volume production with automatic fiducial recognition and print area 320 x 440 mm.

Automatic inline high performance low maintenance stencil/screen printer for medium to high volume production. Cycle time - 9s. (Standard); 7s. Optional (Velocity); 5s. Optional (Velocity+). Works with max. PCB size 610 x 515 mm.

The ASSCON desoldering system for use in vapor phase soldering systems. Multi-pole SMD components, ball grid arrays, connector strips as well as mechanical elements can be desoldered gently and safely.

Its composition, Preheater and PCB Support, is a complete solution to rework medium / large PCBAs, such as the ones commonly used in laptops or PCB panels. It features a heating area of 360 x 277 mm / 14.2 x 10.9 in. and four TC connections.

Indispensable for avoiding thermal shock on multilayer PCBs while reworking. Its composition, Preheater and PCB support, is a complete solution to rework small / medium PCBAs, such as the ones commonly used in electronic industries. It features a heating area of 130 x 135 mm / 5.12 x 5.31 in and four TC connections.

Set consisting of several solder paste dispensing needles with different gauge, from gauge 18 to gauge 30, recommended for solder paste Type 2, 3, 4, 5 and 6. Supplied in boxes of 16 units.

Enhance precision soldering with JBC C245 cartridges, offering versatile SMD handling and extended lifespan for demanding tasks.

Maximize desoldering performance with JBC Long Life tips, delivering instant heat-up and superior durability for DR560 tools.

C250 Cartridge Range can be aligned using the anti-rotation screw incorporated on the tool. These cartridges feature straight and bent tips to best suit your working needs.

Perfect your general soldering needs with JBC R245 cartridges, offering 4-way positioning and precise alignment for consistent results.

Tackle demanding soldering jobs with JBC C470 cartridges, offering high-power performance and extended lifespan for heavy-duty work.

C120 Cartridge Range is suitable for soldering and desoldering chip components or dual in line easily, reducing handling time. They work with Micro Tweezers which enables to align the cartridges according to the user needs.

R470 Cartridge Range is designed for Heavy Duty Soldering Applications and have an special thickness of protection. Its design includes a square cross-section that centers the cartridge perfectly into the Soldering Irons and guarantees precise vertical positioning.

C420 Cartridge Range is suitable for soldering and desoldering SMD components, reducing handling time. These cartridges are compatible with HT420 and AT420 Thermal Tweezers.

C210 Cartridge Range is suitable for precision soldering jobs with medium power requirements. Due to the size, these cartridges are perfect to work with SMD, under a microscope, or with conventional components.

Master nano-scale soldering with JBC C115 cartridges, delivering microscopic precision and 5x longer life for delicate work.

This is a complete system of Preheater and PCB support for preheating big-sized PCBA's and ideal for repetitive soldering jobs. It features a heating area of 510 x 610 mm / 20.07 x 24 in. with 6 independent work zones (255 x 203 mm / 10.04 x 8 in) to be switched on/off.

HM245 is a complete solution for selective general electronics applications. The Cartridge is exchanged manually.

HA470 Heavy Duty Soldering Set is the most powerful selective soldering solution and the first one featuring Automatic Cartridge Exchange.

FAE is the most effective solution to avoid exposure to solder fumes. Fume extraction starts up when the tool is lifted from the stand, operating only when soldering. This function saves power and extends filter life.

Perform a thorough and gentle tip cleaning increasing heat transfer and maximizing the soldering quality in less than 1 second. CL2008 Fiber Brushes supplied provides a soft cleaning, specially recommended in regular usage to improve tip life.

FAE is the most effective solution to avoid exposure to solder fumes. Fume extraction starts up when the tool is lifted from the stand, operating only when soldering. This function saves power and extends filter life.

WSB is specially designed for stripping wire insulations made of thermostable materials such as Teflon*, Kapton*, Silicone, Rubber, PVC, Kynar, Nylon and Polyethylen from 34 to 16 AWG (0.16 to 1.29 mm) with temperatures up to 800 ºC / 1470 ºF.

The complete solution to rework circuits with medium power requirement. Equipped with T245 General Purpose Handle and DR560 Desoldering Iron. Its DDE 2-Tool Control Unit is capable of manage up to 2 tools simultaneously and fully compatible with 10 different JBC tools.

JNA is the only Hot Air Station to rework SMDs without affecting nearby components. It is the perfect station for easy and high-precision reworking of components as small as 01005, even under the magnifying glass.

TESE is a precision hot air station capable of reworking small and medium SMDs. Connecting an external thermocouple provides a high-precise close-loop control of the component/PCB during the rework process or can also be used to protect a component or a specific area of the PCB.

Ideal for soldering processes requiring high productivity. It includes JBC Most Efficient Soldering System. This station is supplied with GALE10V to feed solder wire of Ø 1 mm and is furthermore compatible with solder wires from Ø 0.4 mm up to Ø 1.8 mm, using the respective Solder Wire Guide Kit.

Ideal for soldering and reworking the smallest SMD. It provides all the advantages of JBC Most Efficient Soldering System.

DME Control Unit manages up to 4 tools simultaneously and is fully compatible with 10 different JBC tools. MSE Electric Desoldering Module is indispensable for a Repairing process. It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation Modes help to extend life of tips.

DME Control Unit manages up to 4 tools simultaneously and is fully compatible with 10 different JBC tools. MSE Electric Desoldering Module is indispensable for a Repairing process. It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation Modes help to extend life of tips.

This station is the most powerful soldering unit in the JBC range and it is designed for soldering applications that require large amounts of heat. It provides all the advantages of the JBC Most Efficient Soldering System.

The CDN is designed for highest-precision jobs in any micro-soldering application, offering maximum control working under the microscope. It provides all the advantages of JBC Most Efficient Soldering System in the smallest footprint.

Designed for highest precision applications offering maximum control working under microscope. It provides all the advantages of the JBC Most Efficient Soldering System.

Ideal for soldering and reworking SMT chip components, small / medium SOP and dual line components. It provides all the advantages of the JBC Most Efficient Soldering System in the smallest footprint.

Why Soldering Assistant? It will help to improve the soldering skills, to select the optimal temperature and cartridge and to have a more efficient and quality production. This station is deal for general soldering applications.

JTSE is a high powered Hot Air Station capable of reworking all types of SMD's. The combination of the exclusive JBC hot air system with protectors, tripods and extractors ensures desoldering components easily and safely, concentrating the heat on the selected component.

Ideal for soldering SMD. It provides all the advantages of the JBC Most Efficient Soldering System in the smallest footprint.

For general electronics application. It provides all the advantages of the JBC Most Efficient Soldering System in the smallest footprint.

The Dry storage cabinets in the SD+ series are the highest performance versions of the SD range and are fully network compatible. The Storage Cabinets are equipped with high precision sensors, dynamic regeneration and integrated data logging. Safe and energy efficient low humidity control of <2% RH. A second drying unit ensures uninterrupted and redundant drying (SD+ 1104, 1106 and 1704 only).

The HSD Series Drying Cabinets deliver outstanding drying for moisture sensitive components and PCBs as a result of a high-performance drying unit

SDB Series Drying Cabinets are engineered for medium- to long­-term storage. The storage cabinets are equipped with a patented U­-4001 drying unit. The drying unit delivers outstanding drying performance. The drying unit guarantees constant low relative humidity ≤5% RH for medium- to long-term storage of moisture sensitive components and PCBs. Oxidation risks associated with long-term storage can hereby be avoided.

MENISCO ST78 is a measuring device which allows any wettability phenomena to be quantified every time solids and liquids are involved.

Fully new versatile multimedia equipment, with two modules for all type of solderability tests.

Automatic inline wave soldering machine with a preheat length of 2100 mm. It works with max. PCB size 400 x 400mm. and solder bath capacity 450 kg.

Automatic inline wave soldering machine with a preheat length of 1600 mm. It works with max. PCB size 400 x 400mm. and solder bath capacity 475 kg.

Automatic inline wave soldering machine with a preheat length of 700 mm. It works with max. PCB size 400 x 400mm. and solder bath capacity 270 kg.

Automatic benchtop wave soldering machine with a preheat length of 500 mm. It works with max. PCB size 300 x 400mm. and solder bath capacity 150 kg.

Auto-Focus Power™ is a ‘recipe search engine’ with an intelligent database.

The KIC Carrier further assists the task of profiling, and is available in several models to accommodate a variety of reflow process types.

Program the KIC MVP™ fixture by running a single profile on your PCB. Subsequent profile runs only require the use of the MVP fixture without the production board. The single programming run eliminates the need to sacrifice your PCB.

KIC’s powerful Navigator Power™ software is a system that lowers your electricity use and improves production quality.

The ProBot compliments the reflow oven by automatically recording the profile for each and every processed PCB. On the fly, the profile is compared to the established process window to determine whether it is in spec or not. This occurs in the background without human intervention and without interrupting production. The ProBot is programmed by running a manual profile using a KIC profiler.

The KIC® Wave Surfer™ is a self-contained system that provides critical data on wave solder machine set up and performance.

The RPI utilizes embedded sensors for heat and conveyor speed to automatically measure and display PCB profile, Process traceability, SPC and Cpk charts, statistics of defects, process yields and other.

KICstart²™ utilizes the core technologies developed by KIC, the world’s premier thermal profiling company. Packaging these innovative technologies into a low-cost system, makes it an ideal cost effective entry level thermal profiler. The KICstart² profiler has everything you need to quickly acquire an accurate profile, without complicated features that can slow you down. You can connect 6 Thermocouples.

K² Profile Setter makes oven setup easy and quick (with optional KIC’s optimization software). You can connect 7 or 9 Thermocouples. User friendliness and convenience now include profile viewing on Android and Apple mobile devices.

Inline, modular selective soldering system designed for medium and high production volumes Synchrodex offers high speed and flexibility. It has a max. working area of 457mm x 610mm.

The Jade Pro is a handload system, incorporating a universally adjustable tooling carrier capable of accommodating PCB's or pallets up to 457mm x 508mm. It is based on a DC servo drive and has 2 independent solder pots that can be configured with standard or jet-wave nozzles as well as automatic pot change.

Entry-level, handloading, benchtop machine for small to medium batch production volumes. Offered with two universal, quick change tooling carriers, each one can be exchanged to optimize cycle time. Each carrier is capable of handling a board size up to 330mm x 250mm.

RTX-113 is a unique X-ray inspection system, designed for rapid, reliable inspection of both multi-layer and assembled printed circuit boards.

RTX-113HV is designed for inspection of multi-layer and assembled printed circuit boards with dense metal BGAs

The JewelBox-70T delivers superior image quality with excellent resolution and sensitivity for laboratory and failure analysis applications. The system’s 10-micron MicroTech™ x-ray source provides magnification from 7X to 2000X, with resolution of 100 line pairs/mm.

The JewelBox 90T delivers precision x-ray images of ultra high resolution and gray scale accuracy without the aberrations of Voltage Blooming and Pin cushioning prevalent in other systems. The patented, award-winning x-ray camera technology, in conjunction with its 90 kv, 5-7 micron focal spot x-ray tube, delivers precise x-ray images at magnifications from 7X to 2000X with a resolution of 100 line pairs/mm.

The JewelBox 110T delivers precision x-ray images of ultra high resolution and gray scale accuracy without the aberrations of Voltage Blooming and Pin cushioning prevalent in other systems. The patented, award-winning x-ray camera technology, in conjunction with its 110 kv, 5-7 micron focal spot x-ray tube delivers precise x-ray images at magnifications from 7X to 1,200X with a resolution of 100 line pairs/mm.

The JewelBox 100T delivers precision x-ray images of ultra high resolution and gray scale accuracy without the aberrations of Voltage Blooming and Pin cushioning prevalent in other systems. The patented, award-winning x-ray camera technology, in conjunction with its 100kv, 5 micron focal spot x-ray tube (replaces 90 kv, 5-7 micron focal spot x-ray tube), delivers precise x-ray images at magnifications from 7X to 2000X with a resolution of 500 line pairs/mm.

Automatic inline high-speed, high-precision 3D-CT X-ray inspection system.

Manual stencil printer for small volume production with print area 610 x 610 mm.

Semi-automatic stencil printer. Ideal for medium production volumes of long LED PCB’s with print area - 1200 x 400 mm.

Benchtop reflow and convection oven for prototyping and small volume production. 1 Heating zone and Max. reflow temperature - 260 °.

Reflow soldering oven for small volume production with 2 Heating zones and Max. reflow temperature - 350°C

Reflow soldering oven for small volume production with 4 Heating zones and Max. reflow temperature - 320°C

Reflow soldering oven with best quality-price ratio for medium volume production with 4 Heating zones and Max. reflow temperature - 350°C.

Heller 1913 MK5 features lowest cost of ownership combined with high reliability. The 1913 MK5 is an inline reflow oven for high volume production with 13 Top and 13 Bottom heating zones as well as 3 Top cooling zone.

Heller 1936 MK7 is one of the most popular models from the MK7 family featuring lowest consumption of N2 and electrical energy, shortest time for profile changeover and overall lower oven height with 16 cm. The 1936 MK7 is an inline reflow oven for high volume production with 10 Top and 10 Bottom heating zones as well as 3 Top cooling zone.

Heller 1826 MK7 is one of the most popular models from the MK7 family featuring lowest consumption of N2 and electrical energy, shortest time for profile changeover and overall lower oven height with 16 cm. The 1826 MK7 is an inline reflow oven for medium to high volume production with 8 Top and 8 Bottom heating zones as well as 2 Top cooling zone.

Heller 1809 MK5 features lowest cost of ownership combined with high reliability. The 1809 MK5 is an inline reflow oven for medium to high volume production with 9 Top and 9 Bottom heating zones as well as 2 Top cooling zone.

Heller 1707 MK5 features lowest cost of ownership combined with high reliability. The 1707 MK5 is an inline reflow oven for medium volume production with 7 Top and 7 Bottom heating zones as well as 1 Top cooling zone.

Inline vapor phase machine for high volume production. Available in single or dual lane configuration with Max. solder length 1500 mm.

Inline vapor phase machine for medium volume production. Works with Max. solder format 620 x 520 mm. When voids reduction is required, vacuum is applied during the soldering process.

Inline vapor phase machine for medium volume production. Works with Max. solder format 750 x 620 mm. and Max. component height 60 mm.

Stand alone vapor phase machine for small volume production. PCB’s are soldered at the same time placed on a carrier with dimensions 610 x 460 mm.

Stand alone vapor phase machine for medium to high volume production. PCB’s are soldered at the same time placed on a carrier with dimensions 600 x 600 mm. When voids reduction is required, vacuum is applied during the soldering process.

Entry level stand-alone P+P machine for small to medium volume production.

Benchtop stand-alone P+P machine for prototype and small-volume production

Automatic inline P+P machine specially developed for fast and highly accurate assembly of LED's in high volume production and PCB size between 600 and 1200 mm.

Automatic inline P+P machine for small volume production with up to 256 feeders and max. speed of 5 500 cph (IPC 9850).

Automatic inline P+P machine for small volume production with up to 160 feeders and max. speed of 3 400 cph (IPC 9850).

Automatic inline P+P machine for medium volume production with up to 96 feeders and max. speed of 18 800 cph (IPC 9850)

Automatic inline P+P machine for medium volume production with up to 96 feeders and max. speed of 52 000 cph (IPC 9850).

Manually operated maintenance cleaning system. Simple and cost effective solution. Customized sizing available.