The Jade Pro is a handload system, incorporating a universally adjustable tooling carrier capable of accommodating PCB's or pallets up to 457mm x 508mm. It is based on a DC servo drive and has 2 independent solder pots that can be configured with standard or jet-wave nozzles as well as automatic pot change.

Entry-level, handloading, benchtop machine for small to medium batch production volumes. Offered with two universal, quick change tooling carriers, each one can be exchanged to optimize cycle time. Each carrier is capable of handling a board size up to 330mm x 250mm.

RTX-113 is a unique X-ray inspection system, designed for rapid, reliable inspection of both multi-layer and assembled printed circuit boards.

RTX-113HV is designed for inspection of multi-layer and assembled printed circuit boards with dense metal BGAs

The JewelBox-70T delivers superior image quality with excellent resolution and sensitivity for laboratory and failure analysis applications. The system’s 10-micron MicroTech™ x-ray source provides magnification from 7X to 2000X, with resolution of 100 line pairs/mm.

The JewelBox 90T delivers precision x-ray images of ultra high resolution and gray scale accuracy without the aberrations of Voltage Blooming and Pin cushioning prevalent in other systems. The patented, award-winning x-ray camera technology, in conjunction with its 90 kv, 5-7 micron focal spot x-ray tube, delivers precise x-ray images at magnifications from 7X to 2000X with a resolution of 100 line pairs/mm.

The JewelBox 110T delivers precision x-ray images of ultra high resolution and gray scale accuracy without the aberrations of Voltage Blooming and Pin cushioning prevalent in other systems. The patented, award-winning x-ray camera technology, in conjunction with its 110 kv, 5-7 micron focal spot x-ray tube delivers precise x-ray images at magnifications from 7X to 1,200X with a resolution of 100 line pairs/mm.

The JewelBox 100T delivers precision x-ray images of ultra high resolution and gray scale accuracy without the aberrations of Voltage Blooming and Pin cushioning prevalent in other systems. The patented, award-winning x-ray camera technology, in conjunction with its 100kv, 5 micron focal spot x-ray tube (replaces 90 kv, 5-7 micron focal spot x-ray tube), delivers precise x-ray images at magnifications from 7X to 2000X with a resolution of 500 line pairs/mm.

Automatic inline high-speed, high-precision 3D-CT X-ray inspection system.

Manual stencil printer for small volume production with print area 610 x 610 mm.

Semi-automatic stencil printer. Ideal for medium production volumes of long LED PCB’s with print area - 1200 x 400 mm.

Benchtop reflow and convection oven for prototyping and small volume production. 1 Heating zone and Max. reflow temperature - 260 °.

Reflow soldering oven for small volume production with 2 Heating zones and Max. reflow temperature - 350°C

Reflow soldering oven for small volume production with 4 Heating zones and Max. reflow temperature - 320°C

Reflow soldering oven with best quality-price ratio for medium volume production with 4 Heating zones and Max. reflow temperature - 350°C.

Heller 1936 MK7 is one of the most popular models from the MK7 family featuring lowest consumption of N2 and electrical energy, shortest time for profile changeover and overall lower oven height with 16 cm. The 1936 MK7 is an inline reflow oven for high volume production with 10 Top and 10 Bottom heating zones as well as 3 Top cooling zone.

Heller 1826 MK7 is one of the most popular models from the MK7 family featuring lowest consumption of N2 and electrical energy, shortest time for profile changeover and overall lower oven height with 16 cm. The 1826 MK7 is an inline reflow oven for medium to high volume production with 8 Top and 8 Bottom heating zones as well as 2 Top cooling zone.

Heller 1809 MK5 features lowest cost of ownership combined with high reliability. The 1809 MK5 is an inline reflow oven for medium to high volume production with 9 Top and 9 Bottom heating zones as well as 2 Top cooling zone.

Heller 1707 MK5 features lowest cost of ownership combined with high reliability. The 1707 MK5 is an inline reflow oven for medium volume production with 7 Top and 7 Bottom heating zones as well as 1 Top cooling zone.

Inline vapor phase machine for high volume production. Available in single or dual lane configuration with Max. solder length 1500 mm.

Inline vapor phase machine for medium volume production. Works with Max. solder format 620 x 520 mm. When voids reduction is required, vacuum is applied during the soldering process.

Inline vapor phase machine for medium volume production. Works with Max. solder format 750 x 620 mm. and Max. component height 60 mm.

Stand alone vapor phase machine for small volume production. PCB’s are soldered at the same time placed on a carrier with dimensions 610 x 460 mm.

Stand alone vapor phase machine for medium to high volume production. PCB’s are soldered at the same time placed on a carrier with dimensions 600 x 600 mm. When voids reduction is required, vacuum is applied during the soldering process.

Entry level stand-alone P+P machine for small to medium volume production.

Benchtop stand-alone P+P machine for prototype and small-volume production

Automatic inline P+P machine specially developed for fast and highly accurate assembly of LED's in high volume production and PCB size between 600 and 1200 mm.

Automatic inline P+P machine for small volume production with up to 256 feeders and max. speed of 5 500 cph (IPC 9850).

Automatic inline P+P machine for small volume production with up to 160 feeders and max. speed of 3 400 cph (IPC 9850).

Automatic inline P+P machine for medium volume production with up to 96 feeders and max. speed of 18 800 cph (IPC 9850)

Automatic inline P+P machine for medium volume production with up to 96 feeders and max. speed of 52 000 cph (IPC 9850).

Manually operated maintenance cleaning system. Simple and cost effective solution. Customized sizing available.

Fully automatic zero drain system. Ideal for cleaning middle to high volume of electronic assemblies. Suitable also for cleaning of soldering pallets and mechanical parts.

High capacity defluxing machine ideal for low mix production. Best for well matching cleaner and flux combinations.

Fully automatic high performance zero drain system. Ideal for cleaning middle to high volume of electronic assemblies. Suitable for cleaning high volume of stencils.

Fully automatic cleaning machine. Ideal for cleaning stencils, screens and misprints. Suitable for defluxing of small volume of PCBA with high quality requirements.

Fully automatic cleaning machine based on spray-in-air closed loop zero drain system. Multiple platform configuration. Superb for cleaning high volume of electronic assemblies.

Series 600 magazines are cost-effective, with the help of adjustable clamps the side wall can be set to the required PCB width.

In automatic mode when the magazine is put on a loader, the bar is moved to the outside wall by a wedge. When removed, the slot locks again. In Manual mode when lifting by hand, the bar is moved to the outside wall and locks in upper position. When the magazine is lifted again, the slots are locked.

Variable width setting by pulling the gear belt by hand. By pulling the gear belt, the side walls are set to the PCB width.

Using SMEMA interface, this unit successfully links any SMT machines. This conveyor can work in inspection mode and linking mode.

Conveyor which cools down PCB's after the reflow oven in the SMT line. This Cooling conveyor for PCB's is available with touch screen controlled cooling fans, on top or bottom. The cooling time length is available to setup on the touch screen software.

This vertical buffer is designed to have the function as FIFO/ LIFO (First in, First Out/ Last in , First Out) and by-pass functions. It can store up to 20 PCB's

The magazine loader is used when a magazine of PCB’s needs to be loaded into a production line, this units is capable of handling 4 magazines that can be easily accessed from the front (or rear) of the machine. It is used for high volume production.

An arriving PCB is taken from the conveyer in front of the Unloader up by the attached conveyor and then pushed into the magazine by a specially designed pusher. The system is good for low to medium volume production.

The magazine loader is used when a magazine of PCB’s needs to be loaded into a production line, this units is capable of handling 1 magazine that can be easily accessed from the front (or rear) of the machine. It is used for low and medium volume production.

Precise dosage for solder paste, adhesive, solder flux, etc. – ideal for SMT rework.

The ST100S is a digital shot timer used for syringe dispensing. This compact controller is an economic and ergonomic solution for improving the waste, inaccuracies, and clean up associated with many manual processes.

Compact three-axis robotic gantry system, especially suitable for automated selective dispensing or coating.

New, flexible robotic inline system for selective dispensing or coating that is suitable for a wide range of applications. Working area up to 521 x 485 mm.

Flexible three or four-axis robot that is suitable for almost any desktop or laboratory selective coating and automated dispensing application.

Flexible robotic inline system for selective dispensing or coating with a maximum working area of 621 x 595 mm. Provides flexibility and is suitable for a wide range of applications.

Blade for cab separator MAESTRO 5L.

Blade for cab separators MAESTRO 2/2M.

Lower blade 450 mm. for cab separators MAESTRO /3E/4M/4S.

Blade for cab separators MAESTRO 2/2M/3E/4M/4S.

Blade for separator cab HEKTOR 2.

Blade for separator cab HEKTOR 2.

Blade for separator cab HEKTOR 2.

Blade for separator cab HEKTOR 2.

HEKTOR 2 separator for cutting milled PCB's enables fast cutting, precise and uniform removal of the cut material. The drive of the blade is carried out with the help of compressed air.

MAESTRO 2 allows fast and easy manual cutting of PCB's without damaging the sensitive SMD components mounted on them with a cutting length of up to 300 mm.

MAESTRO 2M allows fast and easy cutting of printed circuit boards with motorized drive on the lower blade without damaging the sensitive SMD components mounted on them, with a cutting length of up to 300 mm.

MAESTRO 5L is designed for motorized PCB cutting without damaging the sensitive SMD components mounted on them. Works with max. PCB width of 310 mm.

MAESTRO 4S/600 separates both small and large PCB's quickly and economically without stress. With a cutting length of up to 600 mm.

MEASTRO 3E allows quick and easy manual cutting of PCB's without damaging the sensitive SMD components mounted on them with a cutting length of up to 450 mm.

MAESTRO 4S/450 separates both small and large PCB's quickly and economically without stress. With a cutting length of up to 450 mm.

High flexibility automatic inline 3D AOI for high-mix production with AI-assisted programming and max. PCB size - 533 x 609 mm.

Automatic inline 3D AOI compatible with both SMT and through-hole processes. Meets all quality requirements for complex inspection targets such as high-density PCB's, PCB housing, a mix of both extremely small and tall components. Max. PCB size - 686 x 870 mm.

Automatic inline high accuracy and repeatability 3D SPI with auto-programming and a 80 Mpixel Camera, 12-bit CMOS sensor.

Automatic inline high accuracy and repeatability 3D SPI with auto-programming and a 160 Mpixel Camera, 12-bit CMOS sensor.

Automatic inline high-speed, high-precision 3D-SPI machines specialized in the inspection of SMT solder processes. Saki's 3Si series are available with PCB clearance (Top/Bottom) – 40mm/60mm and Camera resolution of 12 μm or 18 μm.

Designed to meet the needs of the small and medium batch production companies. The Jade MKII entry-level system offers uncompromised selective soldering quality at a very low cost. The Jade MKII is a handload system, incorporating a universally adjustable tooling carrier capable of accommodating PCB's or pallets up to 457mm x 508mm.

Dry wipes made of lint-free material that does not leave lint after cleaning stencils and printed circuit boards. 150 pcs. in a box, size: 228 x 210 mm.

Top-Loader vapor phase machine for prototypes and small volume batch production. PCB’s are soldered at the same time placed on a carrier with dimensions 450 x 450 mm.

Electroguard A40 is a Single Pack Water Based, Static Dissipative Acrylic paint suitable for floors and walls. It is a high specification method of grounding personnel and preventing static build up at an inexpensive price.

The PERMACOL 2040-series are thermosetting single component adhesives especially developed for the SMT purposes. The 2040S/40R is intended for stencil printing. Delivered in 10 ml. syringes and 310 ml. cartridges.

Electroguard E30 is a Two-Pack Water Based, Static Dissipative Polyurethane paint. It offers an inexpensive yet high specification means of protecting sensitive areas from the costly effects of static build up and provides a means of grounding personnel.

The PERMACOL 2040-series are thermosetting single component adhesives especially developed for SMT purposes. The 2040S/20Ris intended for stencil printing and high viscosity dispensing. Delivered in 10 ml. syringes and 310 ml. cartridges.

B·IRON 500 is specially designed for electronic production and intensive works. It performs up to 500 medium-sized SMD soldering joints per charge.

KIC Vision2™ utilizes temperature and speed sensors embedded in the oven for consistent and accurate profile measurements of the processed PCB.

Stand alone vapor phase machine for small volume production. PCB’s are soldered at the same time placed on a carrier with dimensions 480 x 295 mm. When voids reduction is required, vacuum is applied during the soldering process.

Automatic inline P+P machine for medium volume production with up to 160 feeders and max. speed of 10 500 cph (IPC 9850).

An arriving PCB is taken from the conveyer in front of the Unloader up by the attached conveyor and then pushed into the magazine by a specially designed pusher. The system is good for high volume production.

Humiseal T521 EU Thinner is compatible with the following Humiseal coatings: 1A20, 1A27, 1A33, 1B31, 1B66, 1B73, 1B51 and 1R32. It contains flammable ingredients and is in full compliance with RoHS directive 2015/863/EU. Delivered in 1L, 5L or 20L can.

Automatic inline wave soldering machine with a preheat length of 1100 mm. It works with max. PCB size 400 x 400mm. and solder bath capacity 370 kg.

The PERMACOL 2040-series are thermosetting single component adhesives especially developed for the SMT purposes. The 2040D/R is intended for high speed dispensing. Delivered in 10 ml. syringes and 310 ml. cartridges.