Comparing Application Methods and Equipment for Electronics Encapsulation
Диспенсиране
27/10/2024
Once your method of application has been decided, you then need to evaluate the material for optimal PCB protection. Unfortunately, there really is no one right answer. Different materials, especially thermally conductive encapsulation polymers, come with a wide range of advantages and disadvantages. Much like choosing a method of encapsulation, the material itself will depend heavily on your specific project and operational requirements. Luckily, HumiSeal has your back, offering a wide range of single and two-component encapsulants for many end uses.
Към оригинала на публикацията
Към оригинала на публикацията
Други публикации
Диспенсиране
PVA
The Benefits of Progressive Cavity Pumps in Your Dispensing Process
Progressive cavity pumps are ideal solutions for applications requiring a high level of dosing accuracy while minimizing shear on dispensed materials. By nature, progressive cavity pumps operate in accordance with a positive displacement principle. Material flows through the valve as it progresses through fixed cavities created as a helical rotor turns.
Разберете повече
Диспенсиране
PVA
The Advantages & Considerations of Dispensing Thermal Interface Materials
As powerful electronics shrink in size and increase in variety, thermal interface materials [TIM] for heat dissipation continue to gain importance in the manufacturing industry. A variety of methods exist for aiding this heat transfer. Gap filling pads, adhesive tapes, and dispensable gels are the most common. The primary considerations when selecting a TIM material is the thermal conductivity and dielectric strength.
Разберете повече
Диспенсиране
PVA
Meter-Mix Dispensing Basics
In the world of bonding, filling, and encapsulating the term “meter-mix” refers to the process and the hardware required to accurately manage, blend, and dispense multi-part fluids in an automated fashion. Most often in electronics and industrial dispensing, meter-mix dispensing is based upon processing a 2-part adhesive that is supplied as a base component plus a hardener component.
Разберете повече