JBC preheating system for medium/large PCBs showing labeled PCB support frame, preheater unit with control panel, and handheld digital controller.

Preheater PHBEK

Its composition, Preheater and PCB Support, is a complete solution to rework medium / large PCBAs, such as the ones commonly used in laptops or PCB panels. It features a heating area of 360 x 277 mm / 14.2 x 10.9 in. and four TC connections. Matchless reliability in temperature accuracy and control of the PCBA so that no component is damaged.

It features three work modes:

  1. Power Mode allows working at a fixed power level with the option of using protection thermocouple.
  2. Temperature Mode keeps the PCBA at a selected temperature, using the regulation thermocouple and, optionally, protection thermocouples.
  3. Profile Mode allows control of the heating rate of the PCBA by the use of a control and protection thermocouple, without exceeding the recommended limit levels in each application. It features 22 customizable profiles.

Up to four thermocouples can be connected in any of the three work modes.

PHBS Support is perfectly adaptable to any type of PCBs by means of its many adjustable components and its 3 adjustable clearance positions 28, 38 or 48 mm / 1.1, 1.5 or 1.9 in.

Technical data:

  • Peak power: 1800W (120V & 230V); 1400W (100V)
  • Selectable temperature: 50 to 250 ºC / 120 to 482 ºF
  • Heating area:
    • 180 x 277 mm / 7.1 x 10.9 in - 1 zone
    • 360 x 277 mm / 14.2 x 10.9 in -2 zones
  • Type K TC connector: 4 for Control & Protection
  • Profiles: 22 (up to 16 steps for each)
  • Set temperature profiles: 3 profiles (2, 3 or 4 steps)
  • Maximum work time: 50 min or indefinite
  • ESD safe: Meet ANSI/ESD S20.20-2021
  • Robot connector: Remote control
  • Aux. Connector: Console connection
  • Pedal connector: Connect a pedal (ref. P-005) to control the heater
Technical data/Product datasheet

Similar products

JBC RMSE complete rework system showing stacked control modules, hot air unit, multiple tool stands, desoldering iron, soldering iron, and accessories.

Complete rework station RMSE

RMSE Station, equipped with MSE Module, ensures efficient and precise solder removal with its powerful suction system. It provides the fastest and safest solution for soldering and rework, including hot air applications.
Soldering and rework stations
JBC
JBC compact preheating system showing labeled PCB support frame, dual-zone preheater base unit, and handheld digital control panel with LCD screen.

Preheater PHSEK

Indispensable for avoiding thermal shock on multilayer PCBs while reworking. Its composition, Preheater and PCB support, is a complete solution to rework small / medium PCBAs, such as the ones commonly used in electronic industries. It features a heating area of 130 x 135 mm / 5.12 x 5.31 in and four TC connections.
Soldering and rework stations
JBC
NDKS needle set for DPM-B hand dispenser

Needles kit NDKS

Set consisting of several solder paste dispensing needles with different gauge, from gauge 18 to gauge 30, recommended for solder paste Type 2, 3, 4, 5 and 6. Supplied in boxes of 16 units.
Soldering and rework stations
JBC