Complete rework station RMSE

RMSE Complete Rework System is the quickest and safest solution for soldering and rework, also using hot air. It consists of stackable modules and all the necessary accessories to make your job easier. RMSE features all the Excellence Range benefits. It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation Modes help to extend tip life. DDE 2-Tool Control Unit manages up to 2 tools simultaneously and is fully compatible with 10 different JBC tools. MSE Electric Desoldering Module is indispensable for a complete desoldering process. JTSE Hot Air Station controls the rework task using temperature and airflow profiles. RMSE works simultaneously with DR560 Desoldering Iron, T245 General Purpose Handle and JTT Heater Hose Set.

Technical data:

JTSE CONTROL UNIT

• Peak power: 700 W
• Selectable temperature: 150 to 450 °C / 300 to 840 °F
• Air flow regulation: 5 to 50 SLPM
• Vacuum: 30% / 228 mmHg / 9 inHg
• Profiles: 25 (up to 10 steps for each), 1 preset profile
• Type K TC connector: 1 for Control & Protection
• ESD safe: Meet ANSI / ESD S20.20-2021
• Equipotential bonding: Connection to EPA
• RJ12 Connector: Remote control or FAE Fume Extractor connection
• Pedal connector: Tool control

DDE CONTROL UNIT

• Peak power: 150 W per tool
• Selectable temperature: 90 to 450 ºC / 190 to 840 ºF
• Temperature accuracy: ±3%
• ESD safe: Meet ANSI/ESD S20.20-2021
• Equipotential bonding: Optional connection to EPA
• Tip-to-ground resistance: <2 ohms
• Tip-to-ground voltage: <2 mV
• RMSFAE / Robot connector: Remote control or FAE Fume Extractor connection

MSE MODULE

• Vacuum: 75% / 570mmHg / 22.4inHg
• Flow rate: 9 SLPM
• ESD safe: Meet ANSI/ESD S20.20-2021