Complete JBC rework station featuring DDE control unit with LCD display, desoldering module, soldering iron, desoldering iron, tool stands, and tip holder.

2-Tool Rework Station DDSE

The complete solution to rework circuits with medium power requirement. Equipped with T245 General Purpose Handle and DR560 Desoldering Iron. Its DDE 2-Tool Control Unit is capable of manage up to 2 tools simultaneously and fully compatible with 10 different JBC tools. It provides the best rework quality thanks to JBC Most Efficient Soldering System and, additionally, the intelligent Sleep & Hibernation Modes help to extend life of tips.

Technical data:

  • Nominal power: 370W
  • Peak power: 150 W per tool
  • Selectable temperature: 90 to 450 ºC / 190 to 840 ºF
  • Idle temp. stability (still air): ±1.5ºC / ±3ºF / Meets and exceeds IPC J-STD-001F
  • Vacuum: 75% / 570 mmHg / 22.4 inHg
  • Flow rate: 9 SLPM
  • Temperature accuracy: ±3%Temp. Adjustment: ±50ºC / ±90ºF Through station menu setting
  • Tip-to-ground resistance: <2 ohms
  • Tip-to-ground voltage:<2 mV RMS
  • FAE / Robot connector: Remote control or FAE Fume Extractor connection
  • ESD safe: Meet ANSI/ESD S20.20-2021
Technical data/Product datasheet

Similar products

JBC RMSE complete rework system showing stacked control modules, hot air unit, multiple tool stands, desoldering iron, soldering iron, and accessories.

Complete rework station RMSE

RMSE Station, equipped with MSE Module, ensures efficient and precise solder removal with its powerful suction system. It provides the fastest and safest solution for soldering and rework, including hot air applications.
Soldering and rework stations
JBC
JBC preheating system for medium/large PCBs showing labeled PCB support frame, preheater unit with control panel, and handheld digital controller.

Preheater PHBEK

Its composition, Preheater and PCB Support, is a complete solution to rework medium / large PCBAs, such as the ones commonly used in laptops or PCB panels. It features a heating area of 360 x 277 mm / 14.2 x 10.9 in. and four TC connections.
Soldering and rework stations
JBC
JBC compact preheating system showing labeled PCB support frame, dual-zone preheater base unit, and handheld digital control panel with LCD screen.

Preheater PHSEK

Indispensable for avoiding thermal shock on multilayer PCBs while reworking. Its composition, Preheater and PCB support, is a complete solution to rework small / medium PCBAs, such as the ones commonly used in electronic industries. It features a heating area of 130 x 135 mm / 5.12 x 5.31 in and four TC connections.
Soldering and rework stations
JBC