The JewelBox 110T delivers precision x-ray images of ultra high resolution and gray scale accuracy without the aberrations of Voltage Blooming and Pin cushioning prevalent in other systems. The patented, award-winning x-ray camera technology, in conjunction with its 110 kv, 5-7 micron focal spot x-ray tube delivers precise x-ray images at magnifications from 7X to 1,200X with a resolution of 100 line pairs/mm.

The JewelBox 100T delivers precision x-ray images of ultra high resolution and gray scale accuracy without the aberrations of Voltage Blooming and Pin cushioning prevalent in other systems. The patented, award-winning x-ray camera technology, in conjunction with its 100kv, 5 micron focal spot x-ray tube (replaces 90 kv, 5-7 micron focal spot x-ray tube), delivers precise x-ray images at magnifications from 7X to 2000X with a resolution of 500 line pairs/mm.

Automatic inline high-speed, high-precision 3D-CT X-ray inspection system.

Manual stencil printer for small volume production with print area 610 x 610 mm.

Semi-automatic stencil printer. Ideal for medium production volumes of long LED PCB’s with print area - 1200 x 400 mm.

Automatic offline stencil printer for small and medium volume production with print area 400 x 400 mm. (500 x 400 mm. optional).

Automatic inline stencil printer for medium to high volume production with max. PCB size 400 x 340 mm.

Manual stencil printer for small volume production with print area - 500 x 400 mm.

Semi-automatic stencil printer for small to medium volume production with print area 480 x 420 mm.

Automatic offline stencil printer for medium volume production with automatic fiducial recognition and print area 320 x 440 mm.

Automatic inline high performance low maintenance stencil/screen printer for medium to high volume production. Cycle time - 9s. (Standard); 7s. Optional (Velocity); 5s. Optional (Velocity+). Works with max. PCB size 610 x 515 mm.

Benchtop reflow and convection oven for prototyping and small volume production. 1 Heating zone and Max. reflow temperature - 260 °.

Reflow soldering oven for small volume production with 2 Heating zones and Max. reflow temperature - 350°C

Reflow soldering oven for small volume production with 4 Heating zones and Max. reflow temperature - 320°C

Reflow soldering oven with best quality-price ratio for medium volume production with 4 Heating zones and Max. reflow temperature - 350°C.

Heller 1936 MK7 is one of the most popular models from the MK7 family featuring lowest consumption of N2 and electrical energy, shortest time for profile changeover and overall lower oven height with 16 cm. The 1936 MK7 is an inline reflow oven for high volume production with 10 Top and 10 Bottom heating zones as well as 3 Top cooling zone.

Heller 1826 MK7 is one of the most popular models from the MK7 family featuring lowest consumption of N2 and electrical energy, shortest time for profile changeover and overall lower oven height with 16 cm. The 1826 MK7 is an inline reflow oven for medium to high volume production with 8 Top and 8 Bottom heating zones as well as 2 Top cooling zone.

Heller 1809 MK5 features lowest cost of ownership combined with high reliability. The 1809 MK5 is an inline reflow oven for medium to high volume production with 9 Top and 9 Bottom heating zones as well as 2 Top cooling zone.

Heller 1707 MK5 features lowest cost of ownership combined with high reliability. The 1707 MK5 is an inline reflow oven for medium volume production with 7 Top and 7 Bottom heating zones as well as 1 Top cooling zone.

Inline vapor phase machine for high volume production. Available in single or dual lane configuration with Max. solder length 1500 mm.

Inline vapor phase machine for medium volume production. Works with Max. solder format 620 x 520 mm. When voids reduction is required, vacuum is applied during the soldering process.

Inline vapor phase machine for medium volume production. Works with Max. solder format 750 x 620 mm. and Max. component height 60 mm.

Stand alone vapor phase machine for small volume production. PCB’s are soldered at the same time placed on a carrier with dimensions 610 x 460 mm.

Stand alone vapor phase machine for medium to high volume production. PCB’s are soldered at the same time placed on a carrier with dimensions 600 x 600 mm. When voids reduction is required, vacuum is applied during the soldering process.

Entry level stand-alone P+P machine for small to medium volume production.

Benchtop stand-alone P+P machine for prototype and small-volume production

Automatic inline P+P machine specially developed for fast and highly accurate assembly of LED's in high volume production and PCB size between 600 and 1200 mm.

Automatic inline P+P machine for small volume production with up to 256 feeders and max. speed of 5 500 cph (IPC 9850).

Automatic inline P+P machine for small volume production with up to 160 feeders and max. speed of 3 400 cph (IPC 9850).

Automatic inline P+P machine for medium volume production with up to 96 feeders and max. speed of 18 800 cph (IPC 9850)

Automatic inline P+P machine for medium volume production with up to 96 feeders and max. speed of 52 000 cph (IPC 9850).

Manually operated maintenance cleaning system. Simple and cost effective solution. Customized sizing available.

Fully automatic zero drain system. Ideal for cleaning middle to high volume of electronic assemblies. Suitable also for cleaning of soldering pallets and mechanical parts.

High capacity defluxing machine ideal for low mix production. Best for well matching cleaner and flux combinations.

Fully automatic high performance zero drain system. Ideal for cleaning middle to high volume of electronic assemblies. Suitable for cleaning high volume of stencils.

Fully automatic cleaning machine. Ideal for cleaning stencils, screens and misprints. Suitable for defluxing of small volume of PCBA with high quality requirements.

Fully automatic cleaning machine based on spray-in-air closed loop zero drain system. Multiple platform configuration. Superb for cleaning high volume of electronic assemblies.

Магазини за печатни платки с ръчно настройване на широчината.

Магазини за печатни платки с автоматично настройване на широчината.

Магазини за печатни платки с настройване на широчината чрез ремък.

Using SMEMA interface, this unit successfully links any SMT machines. This conveyor can work in inspection mode and linking mode.

Conveyor which cools down PCB's after the reflow oven in the SMT line. This Cooling conveyor for PCB's is available with touch screen controlled cooling fans, on top or bottom. The cooling time length is available to setup on the touch screen software.

This vertical buffer is designed to have the function as FIFO/ LIFO (First in, First Out/ Last in , First Out) and by-pass functions. It can store up to 20 PCB's

The magazine loader is used when a magazine of PCB’s needs to be loaded into a production line, this units is capable of handling 4 magazines that can be easily accessed from the front (or rear) of the machine. It is used for high volume production.

An arriving PCB is taken from the conveyer in front of the Unloader up by the attached conveyor and then pushed into the magazine by a specially designed pusher. The system is good for low to medium volume production.

The magazine loader is used when a magazine of PCB’s needs to be loaded into a production line, this units is capable of handling 1 magazine that can be easily accessed from the front (or rear) of the machine. It is used for low and medium volume production.

Ръчен диспенсър JBC DPM-B, който работи със спринцовки 3cc и 5cc

Цифрово управляван диспенсер, използван за подаване на материал от спринцовки и е подходящ за нанасяне на спояваща паста, UV лепила, маскиращ материал и др.

Компактна триосна роботизирана портална система, особено подходяща за автоматизирано селективно диспенсиране или лакиране.

Нова, гъвкава роботизирана inline система за селективно диспенсиране или лакиране, която е подходяща за голямо разнообразие от приложения. Работна площ до 521 x 485 mm.

Гъвкав три или четириосов робот, който е подходящ за почти всяко настолно или лабораторно селективно диспенсиране или лакиране.

Роботизирана inline система за селективно диспенсиране или лакиране с максимална работна площ 621 x 595 mm. Осигурява гъвкавост при изпълнение на разнообразни приложения.

Кръгъл нож за сепаратори cab MAESTRO 5L.

Долен кръгъл нож за сепаратори cab MAESTRO 2/2M.

Долен прав нож 450 мм. за сепаратори cab MAESTRO /3E/4M/4S.

Горен кръгъл нож за сепаратори cab MAESTRO 2/2M/3E/4M/4S.

Нож за сепаратори cab HEKTOR 2.

Нож за сепаратори cab HEKTOR 2.

Нож за сепаратори cab HEKTOR 2.

Нож за сепаратори cab HEKTOR 2.

Сепаратор HEKTOR 2 за рязане на фрезовани печатни платки позволява бързо рязане на печатните платки и прецизно и равномерно отстраняване на изрязания материал. Задвижването на острието се извършва с помощта на сгъстен въздух.

Сепаратор MAESTRO 2 позволява бързо и лесно ръчно рязане на печатни платки с прорези без увреждане на чувствителните SMD компоненти, монтирани върху тях с дължина на отрязване до 300 мм.

Сепаратор MAESTRO 2M позволява бързо и лесно рязане на печатните платки с моторизирано задвижване на долното острие без увреждане на чувствителните SMD компоненти, монтирани върху тях, с дължина на рязане до 300 мм.

Сепаратор MAESTRO 5L за моторизирано рязане на печатни платки без увреждане на чувствителните SMD компоненти, монтирани върху тях. Работи с макс. широчина на печатните платки - 310 мм.

Сепаратор MAESTRO 4S/600 за стъпково моторизирано рязане на печатни платки позволява бързо и лесно рязане на печатните платки без увреждане на чувствителните SMD компоненти, монтирани върху тях с дължина на отрязване до 600 мм.

Сепаратор MEASTRO 3E позволява бързо и лесно ръчно рязане на печатните платки без увреждане на чувствителните SMD компоненти, монтирани върху тях с дължина на рязане до 450 мм.

Сепаратор MAESTRO 4S/450 за стъпково моторизирано рязане на печатни платки, без увреждане на чувствителните SMD компоненти монтирани върху тях с дължина на рязване до 450 мм.

High flexibility automatic inline 3D AOI for high-mix production with AI-assisted programming and max. PCB size - 533 x 609 mm.

Automatic inline 3D AOI compatible with both SMT and through-hole processes. Meets all quality requirements for complex inspection targets such as high-density PCB's, PCB housing, a mix of both extremely small and tall components. Max. PCB size - 686 x 870 mm.

Automatic inline high accuracy and repeatability 3D SPI with auto-programming and a 80 Mpixel Camera, 12-bit CMOS sensor.

Automatic inline high accuracy and repeatability 3D SPI with auto-programming and a 160 Mpixel Camera, 12-bit CMOS sensor.

Automatic inline high-speed, high-precision 3D-SPI machines specialized in the inspection of SMT solder processes. Saki's 3Si series are available with PCB clearance (Top/Bottom) – 40mm/60mm and Camera resolution of 12 μm or 18 μm.

Top-Loader vapor phase machine for prototypes and small volume batch production. PCB’s are soldered at the same time placed on a carrier with dimensions 450 x 450 mm.

Пастообразен флюс за ръчно спояване и ремонт на печатни платки. Доставя се в спринцовки по 10 гр.

KIC Vision2™ utilizes temperature and speed sensors embedded in the oven for consistent and accurate profile measurements of the processed PCB.

Stand alone vapor phase machine for small volume production. PCB’s are soldered at the same time placed on a carrier with dimensions 480 x 295 mm. When voids reduction is required, vacuum is applied during the soldering process.

Automatic inline P+P machine for medium volume production with up to 160 feeders and max. speed of 10 500 cph (IPC 9850).

An arriving PCB is taken from the conveyer in front of the Unloader up by the attached conveyor and then pushed into the magazine by a specially designed pusher. The system is good for high volume production.

Сухи кърпи от lint-free материал, който не оставя власинки след почистване на шаблони/стенсили и печатни платки. 150 бр. в опаковка с размери 228 х 210 мм.

Humiseal T521 EU Thinner is compatible with the following Humiseal coatings: 1A20, 1A27, 1A33, 1B31, 1B66, 1B73, 1B51 and 1R32. It contains flammable ingredients and is in full compliance with RoHS directive 2015/863/EU. Delivered in 1L, 5L or 20L can.

Automatic inline wave soldering machine with a preheat length of 1100 mm. It works with max. PCB size 400 x 400mm. and solder bath capacity 370 kg.

Създадена да посрещне нуждите на фирми с малък и среден обем производство, които искат високо ниво на гъвкавост. Системата Jade MKII предлага селективно спояване с безкомпромисно качество на ниска цена. Jade MKII е система с ръчно зареждане, включваща универсален регулируем носач, позволяващ работа с платки или панели с размери до 457 x 508mm.

B-Iron e безжичен поялник, оборудван с 7.4 V литиевойонна батерия и позволява до 500 спойки при напълно заредена батерия.

The PERMACOL 2040-series are thermosetting single component adhesives especially developed for the SMT purposes. The 2040D/R is intended for high speed dispensing. Delivered in 10 ml. syringes and 310 ml. cartridges.

The PERMACOL 2040-series are thermosetting single component adhesives especially developed for SMT purposes. The 2040S/20Ris intended for stencil printing and high viscosity dispensing. Delivered in 10 ml. syringes and 310 ml. cartridges.

The PERMACOL 2040-series are thermosetting single component adhesives especially developed for the SMT purposes. The 2040S/40R is intended for stencil printing. Delivered in 10 ml. syringes and 310 ml. cartridges.

Electroguard E30 is a Two-Pack Water Based, Static Dissipative Polyurethane paint. It offers an inexpensive yet high specification means of protecting sensitive areas from the costly effects of static build up and provides a means of grounding personnel.

Electroguard A40 is a Single Pack Water Based, Static Dissipative Acrylic paint suitable for floors and walls. It is a high specification method of grounding personnel and preventing static build up at an inexpensive price.